Care of Your Button Feeding Device

This article has been archived.
Please use for reference only.

Penn Home Infusion Team
University of Pennsylvania Health System
Ultima Vez Modificado: 1 de noviembre del 2001

Share article

Site Care

Clean the skin around the Button everyday.

You will need the following supplies:

  • washcloth
  • soap
  • towel
  1. Wash your hands (see Handwashing section located in this manual for more information).
  2. Use a wet washcloth and soap to wash the skin, making sure to clean where the stitches go into the skin.
  3. You may take a shower or bath. Allow the water and soap to run over C. your skin.
  4. DO NOT PUT any ointments on the button site without first speaking to your nurse or doctor.
  5. Up to a quarter size of yellow drainage may be normal.
  6. If you have drainage, a dressing may be applied. If redness develops around the tube or the skin hurts when you touch it, apply a warm, wet washcloth to the site and notify your physician.
  7. Once the sutures are removed, rotate the wings of the button one half turn each week.

Cleaning the Feeding Tube Adaptor

  1. Once a day, clean the feeding tube adaptor with warm soapy water and rinse thoroughly.
  2. Rinse the feeding tube adaptor with warm water after each use.
  3. Pipe cleaners may be used for cleaning the feeding tube adaptor if needed.
  4. If you are unable to see through the feeding tube adaptor after cleaning it, use a new one.

Blogs and Web Chats

OncoLink Blogs give our readers a chance to react to and comment on key cancer news topics and provides a forum for OncoLink Experts and readers to share opinions and learn from each other.

OncoLink OncoPilot

Frente a un nuevo diagnóstico de cáncer o de cambiar el curso de su tratamiento actual? Deje que nuestro personal de enfermería cáncer que ayudan a pasar!

Más información